诸城市金益百特机械有限公司

产品品牌：金益百特

产品型号：GYZ

产品用途：废水处理

质保时间：2012-10-10

质保时间：2012-10-10

油水分离设备种类：刮油机

处理水量：1-1000 m3/h

连行重量：1-100 kg

装机容量：1-100

适用范围：污水厂油水分离设备

       

山东金益环保机械有限公司

        GYZ刮油刮渣机

一．产品用途及性能： GYZ型刮渣机是运用平流沉淀的一机两用的设备，将沉淀于池底的泥渣刮集到池子进水端沉渣坑内，以便用抓斗（可另见相关资料）或其它清渣设施（例如阀、泵、螺旋体等）与水体分离，同时将水面浮油等漂浮物刮集到池子的出水端，以供其它的除油设施（如集油管、集油槽、撇油带）进行除油或撇渣。 GYZ型分重型（比重＜2，螺杆提耙）（比重1.2，钢丝绳提耙）两种，重型适用于钢铁厂的轧钢及炼钢连铸浊环水系统（刮集氧化铁皮、油等）。轻型广泛应用于水电站、自来水厂、污水厂、电厂等池底的泥渣综合比重不大的场合。刮泥功能与桁车式刮泥机类似。经处理的水若再经过滤等深度处理后可直接作为循环使用。1.    渣耙、油耙高度可调节，配重后可使刮渣能力加强，对易板结物刮集效果明显。2.    采用双速行走，效率高；并可设定不同的刮集行程，适用范围广。3.    机上设有多种安全保护措施，使用安全可靠。4.    二种机型供选择，经济性能好。5.    如配套PLC等控制系统，可实现全自动运行。并可远程集中控制。6.    可设计成一机多格池形使用。Product use and performance： GYZ type scraping by consumption of the advection sedimentation slag machine is one of the equipment, and will be in the bottom of the pool water slag scraping the sediment pit, in order to grab (see related material) may be clear or other facilities (such as slag valves, pumps, leptospirosis, etc.) and water separation, and water will blow the floating-debris etc, the pool water for other oil facilities such as tubing, integrating with oil, oil or abandoned). GYZ type points (< 2, the proportion of heavy screw mention rake) (1.2, rope mention raked the proportion of two kinds of, heavy steel rolling and applicable turbidity water system of steelmaking and continuous casting iron oxide (shave sets, oil, etc.). Light is widely applied in hydropower station, the waterworks, sewage treatment plant, etc. The bottom of the mud is comprehensively proportion. Mud scraper function and hoisting type mud scraper machine is similar. If the water depth after processing as the filter can be used directly as the cycle. features 1 slag rake, oil rake height is adjustable and can be made after the balance capacity of wind, slag to harden content scraping set effect is obvious. 2 USES double speed, high efficiency, Can set different scraping set itinerary, wide application scope. On 3 sets of safety protection, safety and reliability. 4. Two models for selection and good economic performance. 5 if matching PLC control system, which can realize full-automatic operation. And the remote control. 6 machine can be designed using multiple pool form.